HOW TO BUILD AirBike

| The decoration stand is made from part No.1.
| Chassis 1 is made. No.2 use.
| Chassis 2 is made. No.3, No.4, and No.5 are used.
| Chassis 2 is made. No.3, No.4, and No.5 are assembled.
| The chassis is made. Chassis 1 is assembled with chassis 2.
| The seat is made from No.6.
| Completion of seat.
| The front of the chassis is made. No.7 and No.8 use.
| The front of the chassis is assembled.
| The nose part is made from No.9.
| The linkage part is made from No.10, 11, and 12.
| No.9 is assembled to the nose part.
| The linkage part is inserted, and bonded to the nose part.
| Completion of linkage part.
| It makes it from No.13 ..back.. one chassis.
| It makes it from No.14 and 15 ..back.. two chassis.

No.16 is united referring to a left chart.

Attention:The solid is not imaginable in the development chart.

| No.17 and 18 are united respectively.
| No.16, 17, and 18 are united.
| Figure seen from the rear side.
| Figure seen from the front side.
| No.19, 20, 21, 22, 23, and 24 are assembled, and it makes it ..back.. three chassis.
| ..back.. three-chassis completion.
| The steering wheel base is assembled with No.25.
| No.26 is united.
| No.27 and 28 are assembled.
| No.29 and 30 are assembled.
| The seat is assembled with ..front of the chassis.. ..chassis back.. one.
| It assembles it with ..chassis back.. two ..back.. three chassis.
| The back of the chassis is completed.
| No.27 is assembled to the main body.
| No.28 is assembled to the main body.
| No.29 and 30 are assembled to the main body.
| No.26 is assembled to the main body.
| No.25 is assembled to the main body.
| The steering wheel is made from No.31 and 32. No.33, 34, 35, and 36 are sticked together respectively, and the step is made. The cylinder is penetrated to a suitable place of the main body of making by No.37. And, the step is assembled to a suitable place. Moreover, the steering wheel is assembled to a suitable place of the main body.
| The cylinder is made from No.38 and 39.
| These are installed in the nose part.

The nose cover is made from No.40.

Reference:When you use the paper of thinning, you may paste paper to the other side, and increase strength.

| The caul is assembled with No.41-51.
| In a left chart, the assembled caul is mortar.
| No.52 is installed in the other side of the caul as shown in a left chart.
| No.53 and 54 are installed in the caul. Please adjust the opening condition (installation angle) in this part suitably.
| No.55 is installed in the other side of the caul as shown in a left chart.
| The nose cover of No.40 is assembled to the main body.
| The caul is installed in the main body.

No.57+58 and No.59+60 are assembled.

Attention:Parts are detailed, and it is not easy to work.

| No.62-69 is assembled. No.64 is inserted in 66 up to the same color part. No.65 is similarly inserted in 67.
| No.61 is assembled. The above-mentioned Kobe goods are suitably assembled to the main body.
| Kobe goods assembly reference chart.
| The bend fin is made respectively, and No.70-82 is put on the main body referring to a left chart. In view of the main body, the bend part is adjusted to the side in the back.
| No.84+86 and No.85+87 are sticked together respectively, and the stability wing is made.
| It assembles and the completion of the stability wing that is made the cylinder from No.83, passed through the main body, and made on. There might not be No.83 by you because it doesn't make it easily.
| The completed chart (From the rear side).
| The completed chart (From the front side).

It returns.